SparkFun Electronics Herramientas y suministros

Resultados: 971
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Accesorios SparkFun This is a Screw Terminal with 3.5mm pitch pins. Comes in 2 3 or 4 positions and have the really cool feature of slide-locking together to form any size you need (4 5 up to 20 without problems). Rated up to 300V @ 10A. Terminal can accept 26 to 16
Hoja de datos
No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j
Hoja de datos
No en existencias
Se puede aplicar una tarifa de 20 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This standard 22 AWG hook-up wire is great for general connections between projects (low or high current applications). When you only need two connections to something (like power a button or an indicator LED) this keeps your wiring nice and organi No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable sliding cover as well as an ON/OFF switch that can be used to control power to your project. The 6" ( 150mm) cable has been termin No en existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is a 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.MicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various locations for the plastic key on th No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun The RTK Facet Carrying Case helps protect your valuable high-precision GNSS receiver from the harsh elements of the field. Custom slots are molded into the case for the RTK Facet receiver a 915MHz radio + antenna as well as a large open slot for po No en existencias
Se puede aplicar una tarifa de 34 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Sometimes all you need is a simple but durable carrying case for your parts or projects. The SparkFun Carrying Case is the same one we plan on using some of our newer kits (that you'll see released over the coming weeks and months). This is an inject No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a rugged 10-way 3.5mm-pitch PCB terminal block & 3.5mm-pitch rising clamp screw socket. Ideal for robust I/O and power connections when paired together.Includes: 1x 10-way 3.5mm Rising Clamp Screw Socket 1x 10-way 3.5mm 90 Terminal Block No en existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple and easy to use battery box for powering the micro:bit Board. It accepts two AAA batteries and plugs directly into the board via a JST Connector. No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Here for all your mechatronic needs is a simple high quality continuous rotation servo motor. This servo is able to take in 6 volts and deliver 30.6 oz-in. of maximum torque at 0.14 sec/60 A standard 3-pin power and control cable is attached and No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is the epitome of the phrase "appearances can be deceiving " and trust us with the Hitec HS-85MG that couldn't be more true. The HS-85MG is able to take in 6 volts and deliver 49 oz-in. of maximum torque at 0.14sec/60 and this guy is only ab No en existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a servo adapter cable that allows you to hookup your servo directly to alligator clip connections. On one end you have a shrouded male servo connector and on the other end three 30mm shrouded alligator clips. Alligator clips are a staple ite No en existencias
Se puede aplicar una tarifa de 20 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Here is a simple low-cost servo for all your mechatronic needs. This little guy is able to take in 6 volts and deliver 1.5kg/cm (at 6V). of maximum torque at 0.09 sec/60 (at 6V). This small servo comes with a standard 3 pin power and control cable
Hoja de datos
No en existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun These are a pair of DG01D-E hobby motors with encoder with a hall speed encoder. The motor requires a voltage between 4.5-9V has a gearbox ratio of 1:48 and a speed of 140RPM at 4.5V. The voltage between positive and negative is determined according
Hoja de datos
No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package it mates well with embedded electronics and can be used with common IR remotes. The TSOP382 is a miniaturized receive No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun RedBot Sensor Mechanical Bumper
Hoja de datos
No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This tiny little guy is the ALS-PT19 an SMD ambient light sensor that is much smaller than the standard TEMT6000. The ALS-PT19 is capable of taking a voltage supply range of 2.5V to 5.5V and also functions as an NPN transistor. If you are looking fo No en existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Infrared proximity sensor made by Sharp. Part # GP2Y0A41SK0F has an analog output that varies from 3.1V at 4cm to 0.3V at 30cm with a supply voltage between 4.5 and 5.5VDC. The sensor has a Japanese Solderless Terminal (JST) Connector. We recommend p No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the str No en existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
Hoja de datos
N/A
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This is the main PCB assembly used in the RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see t No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is the enclosure and various bits needed to replace the housing of an RTK Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is the enclosure and various bits needed to replace the housing of an RTK L-Band Facet. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! For more information please see the disassembly No en existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is the main PCB assembly used in the RTK L-Band Facet and is intended for users who need to repair a device. Open Source Hardware has the benefit of allowing a user to understand and repair a broken device themselves! This board does not include No en existencias
Min.: 1
Mult.: 1