CA Accesorios

Resultados: 3,857
Seleccionar Imagen N.° de pieza Fabricante: Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad. Cantidad RoHS Producto Tipo
SparkFun Accesorios SparkFun A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 30mm and has two mounting holes on top.Dimensions: 9.5mm x 45mmDocuments:Datasheet (C3031N-1A2-B10K-GP) 24En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 2En existencias
Se puede aplicar una tarifa de 40 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun It's your basic black action button! This is a very useful small panel-mount momentary switch. It is a SPST N.O. with the threaded portion being 6.75mm in diameter. This button is perfect for basic On/Off functions. Overall length (including leads) 19En existencias
87En pedido
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun LilyPad Slide Switch 20En existencias
Min.: 1
Mult.: 1

Switches
SparkFun Accesorios SparkFun The Molex GNSS Flex antenna is a great option for basic GNSS applications and will work with any of our GNSS boards equipped with a U.FL at a fraction of the cost of many of its big brothers. This antenna supports GPS Galileo BeiDou and GLONASS in 6En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Antennas Flexible GNSS Antenna - U.FL
SparkFun Accesorios SparkFun DC power jack/connector. This is a common barrel-type power jack for DC wall supplies. These are compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm center pole diameter.Datasheets: Datasheet 192En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Connectors
SparkFun Accesorios SparkFun This is a time saving kit of jumper wires - cut stripped and pre-bent for your prototyping pleasure. Included with this kit are 14 various lengths of 22AWG wire - 2 5 7 10 12 15 17 20 22 25 50 75 100 and 125mm - 10 pieces of each.Inclu 18En existencias
31En pedido
Se puede aplicar una tarifa de 20 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun Easily add a serial port to your project with this right-angle PCB-mount DE9 (also known as "DB9") female connector. It features the standard 0.318-inch mounting footprint making it a drop-in replacement or perfect for new designs. This durable con 35En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun Jumper - 2 Pin 538En existencias
350En pedido
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of 15En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthD 113En existencias
Se puede aplicar una tarifa de 20 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun Accesorios SparkFun These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f 12En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test simple circuits; They're also great for breaking out DIP package ICs to jumper wires! If you run out of room n 8En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Breadboards
SparkFun Accesorios SparkFun This 4-pin ATX right angle connector mates up to the standard 4-pin computer peripheral port often found on ATX power supplies. This connector will also serve as a replacement to that found in the SparkFun ATX Power Connector Breakout Kit. 44En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Connectors ATX Right Angle Connector - PTH 4-pin
SparkFun Accesorios SparkFun The micro:bit Edge Connector allows you to expand the capabilities of the micro:bit development platform. This version of the connector features 40 right angle SMD pins. Add this part to your board to create a handy way to swap out micro:bits for p 30En existencias
34En pedido
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Connectors 40-pin micro:bit Edge Connector
SparkFun Accesorios SparkFun A simple constant current power supply that outputs 12.6VDC and 10A. It comes in a robust metal enclosure (IP68 rated) with a 100 000 hour service life. It features Over-voltage Over-current Short Circuit and Over-temperature safety features. This 2En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Power Supplies Constant Current
SparkFun Accesorios SparkFun Brass Sponge 93En existencias
Se puede aplicar una tarifa de 44 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun It's like an Xacto knife only better. We use these extensively when working with PCBs. These small knives work well for cutting traces scraping ground pours and guiding hair-like wires into their proper place. Excel knife comes with aluminum handl 8En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Solder wick coffee and paper towels keep SparkFun running. You can steal someone's diagonal cutters for a minute but you'd better ask before touching their solder wick.Solder wick is composed of copper threads braided together. Flux is normally ad 15En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This set of sewing needles is a must-have when stitching together your next e-textile project. Each envelope contains three 48mm 1.23mm thick needles and two smaller 39mm 0.67mm thick needles. The eye of each size needle is large enough to easily t 20En existencias
Se puede aplicar una tarifa de 14 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun U.FL SMD Connector 7En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1

Connectors RF Connectors / Coaxial Connectors
SparkFun Accesorios SparkFun This is an inner thread (outer nut) adapter that will connect to any of our wireless boards or interface cables and allow you to use an antenna/cable that has an outer thread configuration. You should not need this adapter with any of our antennas or 36En existencias
Se puede aplicar una tarifa de 8 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Adapters
SparkFun Accesorios SparkFun This is a heavy duty SPST toggle switch - your basic on/off toggle. Rated for 2A at 250V or 4A at 125V. Includes a face plate and two threaded nuts for mounting. Works great with our missile switch cover. 13En existencias
Se puede aplicar una tarifa de 40 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1
Switches
SparkFun Accesorios SparkFun The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the 15En existencias
Min.: 1
Mult.: 1
Sensors
SparkFun Accesorios SparkFun This is a simple LED-illuminated tactile button with a green cap. It's just like a basic tactile button but it lights up green! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't e 13En existencias
Se puede aplicar una tarifa de 28 % si el envío es a los Estados Unidos.
Min.: 1
Mult.: 1